產品名稱：自動微量點滴儀-指針式

英國BURKARD PDE0006型自動微量點滴儀

英國BURKARD PDE0006型自動微量點滴儀使用Burkard 1毫升全玻璃注射器，點滴量可分為從0.1到1.0μl不等的十等級。通過使用10毫升注射器和適配器可獲取1.0μl—10μl的劑量范圍。用器械前部的一個控制桿即可快捷地選擇每種劑量。通過使用腳動或圓環式和指動開關，此微量施藥器可在任何位置使用。廣泛應用于實驗室研究及化液體定量滴定工作上。例如應用于殺蟲劑對某種昆蟲的接觸試驗等。
 
產品特點
-低電壓和低能耗
-操作方便、快捷
-英國BURKARD PDE0006型自動微量點滴儀由不含鐵的材料構成，其組成部分經極度陽極處理或電鍍為光亮的鉻合金磨光表面
 
儀器組成
-主要電源供應裝置250V A.C.—12V D.C.或者110V A.C.—12V D.C.
-Burkard全玻璃千分尺注射器
-皮下注射器針頭3/10mm x 25mm

-圓環形開關和指型開關

技術指標

 

*大施藥量	350μl
規格（W×D×H）	230*350*130mm
千分尺基座	23cm x 23cm x 13cm
凈重	4.5kg
毛重	6.5kg

 

Product Description

Doses from 0.1 to 10 μl in twenty steps can be rapidly selected. The instrument may be used in any position, while low voltage and power consumption enables it to be operated from mains or battery using a foot or ring and finger switch.

Construction and Equipment Details

The applicator is constructed from non ferrous materials, with all components either Hard Anodised or Electro-plated. A single selector lever on the unit enables rapid selection of drop sizes from 0.1 μl to 1 μl and 1 μl to 10 μl in ten equal steps. Movement of the selector lever to the automatic rewind position retracts the micrometer spindle in approximately 50 seconds. The glass syringe is clamped or released by turning a single knurled screw.

The following equipment is supplied as standard:

• 1 Mains power supply unit. 240 V a.c. to 12 V d.c. or 110 V a.c. 12 V d.c.
• 1 Burkard all glass micrometer syringe luer fitting.
• 1 hypodermic needle 3/10 mm x 25 mm
• 1 ring and finger switch

Extra Equipment:

10 ml syringe and adapter for droplets up to 10 μl.